Pleasant Hill's basement finish sheet adds a step many cities skip: an insulation inspection before the drywall goes up.
Pleasant Hill's basement sheet
Plan on a building permit and an electrical permit, plus mechanical or plumbing permits if those systems change [1]. Framing, electrical, plumbing and mechanical work are inspected before insulating, the insulation is inspected before sheetrock, and a final comes before the space is used [1]. The city's Building page says that starting July 1, 2025 the adopted codes include the 2021 International Residential Code [2].
Does every Pleasant Hill basement need an egress window?
The sheet says egress windows are required in every basement and every sleeping room, with 5.7 square feet of net clear opening and less than 44 inches from the floor to the bottom of the opening [1]. The sheet is undated, so confirm those sizes with the Building Department at 515-309-9461 [1].
What else is on the list?
A ceiling at least 7 feet above the finished floor, an escape ladder in wells deeper than 44 inches, and interconnected dual-sensor smoke alarms [1].
More on basements
Also on this site: finishing an unfinished basement, egress windows and national cost ranges. For comparison, the Des Moines page covers the city's own rules, and the service areas page lists every city.
Our request form takes a few minutes. Mention that the house is in Pleasant Hill.
We're a referral service, not a contractor, and independent contractors may pay us for referrals.
Sources
- City of Pleasant Hill Building Department, Residential Basement Finish (PDF) https://www.pleasanthilliowa.org/DocumentCenter/View/913/Basement-Finish
- City of Pleasant Hill, Building (fetched Nov 11, 2026) https://www.pleasanthilliowa.org/365/Building